Winding wire SHTherm® 210 Alu
- Enamelled al.wire
- Insulated with theic-mod. polyesterimide and amid-imid topcoat
- Class 200
SHTherm® 210 AL is a highly thermo-resistant enamelled aluminium wire of heat performance class N with a wide range of good and very good quality features. As it is a dual-coat wire its insulation film consists of two different coatings on top of one another. These ensure: a very good permanent thermal and overload resistance, excellent esistance to chemical attacks e.g. by alkalines, washing and cleaning agents, impregnating varnishes and resins, sealing compounds, thinners, solvents and refrigerants as well as their vapours, an excellent mechanical abrasion resistance.
On demand the system can be offered with an additional layer of selflubricating enamel thus giving enhanced properties for winding operations.
Application
Control gears, drives for household equipment, electric motor drives, pump drives, refrigerators, transformers
Standards
IEC /DIN EN 60317-25
NEMA MW 35-A / 73-A
UL approved
Delivery forms
Grade 1: 1.250 - 4.000 mm
Grade 2: 1.250 - 4.000 mm
< 1.250 mm on request
> 4.000 mm on request
You have questions according to our premium winding wires or want to send an inquiry?
Our sales representative will be happy to help you.
Technical data
Typical properties of enamelled round aluminium wire 0.600 m, with insulation film grade 1
| Property | Unit of measure | Set value | Actual value |
|---|---|---|---|
| Outer diameter with varnish | mm | min. 0.627 - max. 0.649 | as set value |
| Bare wire diameter | mm | 0.594-0.606 | as set value |
| Elongation and adhesion | 3 x d | 2 x d | |
| Scrape resistance | N | ≥ 2,2 | ≥ 3.5 |
| Pencil hardness of varnish | H | 4H - 5H | |
| Elongation at break | % | ≥ 12 | ≥ 20 |
| Coefficient of friction | µ | / | ≤ 0.140 |
|
(1) Due to the variety of individual applications we cannot make any generally binding commitments regarding the compatibility. We recommend testing compatibility with the materials being used. |
|||
| Property | Unit of measure | Set value | Actual value |
|---|---|---|---|
| Temperature index | °C | 200 | 207 |
| Cut through temperature (pre-heated block) | °C | / | / |
| Dielectric loss factor (bending point) | (°C) (tan δ) | / | ≥ 185 |
| Heat shock at 220 °C (no cracks in varnish coat after winding) | 3 x d | 3 x d | |
| Solderability | no | no | |
|
(1) Due to the variety of individual applications we cannot make any generally binding commitments regarding the compatibility. We recommend testing compatibility with the materials being used. |
|||
| Property | Unit of measure | Set value | Actual value |
|---|---|---|---|
| Dielectric strength RT | kV | ≥ 2.6 (twist) | ≥ 3 (cylinder) |
| High voltage discontiniuties 1000V | ≤ 25 on 30 m | ≤ 7 on 100 m | |
| Electrical conductivity | MS/m | 35.5 - 36.2 | ≥ 35.85 |
|
(1) Due to the variety of individual applications we cannot make any generally binding commitments regarding the compatibility. We recommend testing compatibility with the materials being used. |
|||
| Property | Set value | Actual value |
|---|---|---|
| Pencil hardness (storage in standard solvent ½ h / 60 °C) | min. H | 3H - 5H |
| Pencil hardness (storage in alcohol ½ h / 60 °C) | min. H | 3H - 5H |
| Resistance to commercial impregnants^(1) | / | yes |
| Resistance to commercial refrigerants (1) | / | yes |
| Resistance to dry transformer oils (1) | / | yes |
| Resistance to hydraulic oils (1) | / | yes |
|
(1) Due to the variety of individual applications we cannot make any generally binding commitments regarding the compatibility. We recommend testing compatibility with the materials being used. |
||