Winding wire SHSold® V180 Glide

  • Enamelled round copper wire, solderable and self lubricating
  • Insulated with polyurethane
  • Class 180

SHSold® V180 Glide is an enamelled copper wire of thermal performance class H and allows quick and direct soldering. The most outstanding characteristics of the wire is the possibilty of efficient and safe contacting of the wire ends by quick and exact soldering at solder bath temperatures from 390 °C upwards without prior mechanical removal of the insulation film. This type of enamelled copper wires fulfills the technical requirements of modern winding techniques and can be well impregnated and cast with compounds in accordance with the manufacturer‘s instructions. The excellent thermal resistance characteristics offer protection when wire-wound coils have to be compound cast and when subject to shorttime overloads. The chemical resistance to aggressive liquid and gaseous mediums is limited, and therefore we recommend that you carry out compatibility tests before using this enamelled copper wire. SHSold® V180 Glide can be easily welded and mechanically connected. Sophisticated process technology and process setting ensure easy mouldability, good elongation plus constant and good insulation characteristics of these wires. The final layer of varnish serves the purpose of providing a superior gliding surface, giving the wire excellent windability features at higher speeds, and enabling a higher filling factor plus reduced soiling of the winding machines. The reduced coefficient of friction helps to avoid damage to the wire during winding and thus maintains the insualtion properties of the wire.

Download datasheet

Application

Contactors, magnetic coils, relays, small motors, transformers, inverters

Standards

IEC / DIN EN 60317-51
NEMA MW 82-C
UL approved

Delivery forms

Grade 1: 0.112 - 0.710 mm (> 0.710 mm on request)
Grade 2: on request

Find your right premium winding wire with us!

You have questions according to our premium winding wires or want to send an inquiry?
Our sales representative will be happy to help you.

Technical data

Typical properties of enamelled round copper wire 0.500 mm, with insulation film grade 1

Mechanical
Property Unit of measure Set value Actual value (typ.)
Overall diameter mm min. 0.524 - max. 0.544 as set value
Bare wire diameter mm as set value
Adhesion (no cracks in film after winding) mandrel diameter 0.500 mm 1 x d/10 % pre-elongation
Scrape resistance N ≥ 3.100 ≥ 6.000
Pencil hardness H 2H - 3H
Elongation at break % ≥ 28 ≥ 37
Coefficient of friction µ / ≤ 0.110

(1) Due to the variety of individual applications we cannot make any generally binding commitments regarding the compatibility. We recommend testing compatibility with the materials being used.

Thermal
Property Unit of measure Set value Actual value (typ.)
Temperature index TI °C 180 185
Cut through temperature (pre-heated block) °C 230 ≥ 230
Dielectric loss factor (bending point) (°C) (tan δ) / ≥ 140
Heat shock at 200 °C (no cracks in varnish coat after winding) mandrel diameter 1.120 mm 1 x d / 10 % pre-elongation
Solderability at 390 °C ≤ 4 ≤ 2.5

(1) Due to the variety of individual applications we cannot make any generally binding commitments regarding the compatibility. We recommend testing compatibility with the materials being used.

Electrical
Property Unit of measure Set value Actual value (typ.)
Dielectrical strength at RT kV ≥ 2.4 (twist) ≥ 3 (cylinder)
High voltage discontiniuties 750V ≤ 10 on 30 m ≤ 7 on 100 m
Electrical conductivity MS/m 58 - 59 ≥ 58.5

(1) Due to the variety of individual applications we cannot make any generally binding commitments regarding the compatibility. We recommend testing compatibility with the materials being used.

Chemical
Property Set value Actual value (typ.)
Pencil hardness (storage in standard solvent ½ h / 60 °C) min. H 2H - 3H
Pencil hardness (storage in alcohol ½ h / 60 °C) min. H H
Resistance to commercial impregnants^(1) / yes
Resistance to commercial refrigerants^(1) / no
Resistance to commercial dry transformer oils^(1) / not recommended
Resistance to commercial hydraulic oils^(1) / no

(1) Due to the variety of individual applications we cannot make any generally binding commitments regarding the compatibility. We recommend testing compatibility with the materials being used.