SynParts – Special Components & Accessoires Cooling Fan CS Series

Due to the ingenious construction, it is possible to adapt just a few cooling fan sizes to a variety of differently sized motors with various motor shafts. The flat design of the yellow cooling fan even enables utilisation for motors with relatively short shaft ends. The material of the cooling fan is soft so that individual blades can be additionally cut. The height of the cooling fan can be reduced by another 10 % by processing the material.

The cooling fan has a 3-point jaw chuck which guarantees secure, central acceptance of the bushes and smooth running.12 cooling fans with large surfaces ensure perfect air volume flow.

The CS series cooling fan is a yellow, mechanically stable polypropylene injection-moulded part. It is available in various installation sizes with a fixed inner diameter. It is possible to insert bushes with varying inner diameters into the cooling fan for various shaft diameters.

Download datasheet


Abmessungen

Application

The yellow cooling fan has been widely and successfully used for 30 years in the production of motors. Due to the two-sided bush installation, it is possible to adjust the distance between the motor housing and the cooler, and to individually adjust various makes of motors. Various standard bushes are available. If the standard borehole does not correspond, it is possible to turn a complete bush according to requirements. A possibly existing keyslot has to be removed.

Delivery forms

See table for dimensions and type designations.

Find your right products with us!

You have questions according to our products or want to send an inquiry?
Our sales representative will be happy to help you.

Technical data

Dimensions
Property Unit of measure CS 71 CS 80 CS 90 CS 100 CS 112 CS 132 CS 160 CS 180
a mm 123 132 165 171 212 247 296 335
b mm 75 79 95 99 124 134 172 214
c mm 26 25 32 36 46 56 56 55
d mm 27 27 42 42 56 56 69 69
e mm 33 33 50 50 63 63 76 76
f mm 15 15 18 18 24 24 29 29
g mm 10 10 13 10 15 17 17 17
h mm 99 131 147 174 203 244 276
Connector
Property Unit of measure CS 71 CS 80 CS 90 CS 100 CS 112 CS 132 CS 160 CS 180
bore diameter 01 mm/inch 5/8" 5/8" 7/8" 7/8" 45 45 0
bore diameter 02 mm/inch 20 20 38 38 42 42
bore diameter 03 mm/inch 19 19 30 30 3/4" 3/4" 1 7/8"
bore diameter 04 mm/inch 16 16 25 25 28 28 45 45
bore diameter 05 mm/inch 14 14 3/4" 3/4" 7/8" 7/8" 1 5/8" 1 5/8"
bore diameter 06 mm/inch 0 1/2" 32 32 50 50
bore diameter 07 mm/inch 22 22 5/8" 5/8" 1 3/8" 1 3/8"
bore diameter 08 mm/inch 1/2" 1/2" 24 24 40 0
bore diameter 09 mm/inch 0 24 1 3/8" 1 3/8" 0
bore diameter 10 mm/inch 0 28 28 1 1/18" 1 1/8" 0
bore diameter 11 mm/inch 0 30 30 0
bore diameter 12 mm/inch 0 0