SynTape® – Electrical Adhesive Tapes SynTape® H 618/ GL.96
SynTape® H 618/ GL.96 is a UL-approved fibre glass adhesive tape with silicone adhesive.
High tear and temperature resistant fabric tape with good resistance to impregnants. Flame retardant according to UL 510.
Application
As electrical insulation of coils and transformers, as final insulation and as coil ends of stators. It is used if high mechanical strength, stress relief and thermal resistance are required.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Silicone
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
| Property | Unit of measure | |
|---|---|---|
| Type/ Ordering information | H 618/ GL.96 | |
| Standard colours | white | |
| Backing | Glass fibre | |
| Backing thickness | mm | 0.120 |
| Adhesive | Silicone | |
| Thermal class | 180 °C/ H | |
| Flame retardant | UL 510 | |
| Electrolyt. corrosion value | 1 | |
| Dielectic strength | kV | 2.5 |
| Adhesiveness / Adhesion to steel | N/cm | 2.3 |
| Total thickness | mm | 0.170 |
| Elongation at break | % | 5 |
| Tensile strength | N/cm | 300 |