SynTape® – Electrical Adhesive Tapes SynTape® H/ 301
SynTape® H/ 301 is a polyimide adhesive tape with silicone adhesive for the highest electrical and thermal demands.
SynTape® H/ 301 has good adhesiveness over a large temperature range, high dielectric strength and smooth removal from the roll.
Application
SynTape® H/ 301 is used for masking of printed circuit board contacts when soldering with subsequent residue-free removal.
Delivery forms
- Width: from 2.5 mm, in 0.1 mm increments
- Standard length: 66 m
- Core diameter: 76 mm (3'')
- Special widths on request.
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
Technical data
| Property | Unit of measure | |
|---|---|---|
| Type/ Ordering information | 301 | |
| Standard colours | Brown-transparent | |
| Backing | Polyimide | |
| Adhesive | Silicone | |
| Total thickness | mm | 0.060 ± 0.005 |
| Backing thickness | mm | 0.030 ± 0.003 |
| Coefficient of expansion | ≥ 50 % | |
| Tensile strength | N/10 mm | ≥ 35 |
| Adhesiveness / Adhesion to steel | N/cm | ≥ 1.6 |
| Dielectric strength | kV | ≥ 5.5 |
| Thermal class | °C | 180 (H) |