SynTape® – Electrical Adhesive Tapes SynTape® F/ PX.11/18/23
SynTape® F/ PX.11/18/23 is a Nomex® polyester adhesive tape with high adhesiveness due to the acrylate adhesive.
An enhanced dielectric strength is achieved via laminating the tape with a polyester film.
Application
For electrical insulation at high thermal loads and as final insulation.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Acrylate
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Type/ Ordering information | F/ PX.11/18/23 | |
| Standard colours | cream | |
| Backing | Polyester/ Nomex® | |
| Backing thickness | mm | 0.225 +/- 10 % |
| Adhesive | Acrylate | |
| Nomex® thickness | mm | 0.180 |
| Polyester thickness | mm | 0.023 |
| Nomex® type | 411 | |
| Thermal class | 155 °C/ F | |
| Total thickness | mm | 0.265 +/- 10 % |
| Tensile strength | N/cm | 40 (min. 30/10 mm) |
| Elongation at break | % | Average value 100 (min. 50 %) |
| Adhesiveness / Adhesion to steel | N/cm | Average value 4.0 (min. 3.0) |
| Dielectic strength | kV | Average value 6 (min. 5) |
| Electrolyt. corrosion value | 1 |