SynTape® – Electrical Adhesive Tapes SynTape® AL.50
SynTape® AL.50 is an aluminium tape with acrylate adhesive and aluminium backing. The adhesive side is covered with a white paper liner. The backing thickness is 0.05 mm.
The tape is characterised by its very wide temperature range of -50 °C to +150 °C, and is especially suitable for processing due to the liner. Flame retardant according to UL 510.
Application
As screening in numerous industrial sectors. It is also used in refrigerators and other white goods.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
acrylate
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
| Property | Unit of measure | |
|---|---|---|
| Type/ Ordering information | AL.50 | |
| Backing | Aluminium | |
| Backing thickness | mm | 0.050 |
| Masking | Silicone paper | |
| Adhesive | Acrylate | |
| Thermal resistance | -50 up to +150°C | |
| Flame retardant | UL 510 | |
| Adhesiveness / Adhesion to steel | N/cm | 7.5 |
| Elongation at break | % | 3 |
| Tensile strength | N/cm | 35 |
| Total thickness | mm | 0.090 |