SynTape® – Electrical Adhesive Tapes SYNTAPE B564
Due to its application as strips, SYNTAPE B564 can be optimally processed and offers high dielectric strength as well as a reinforced winding after impregnation, resulting in enhanced heat conduction and end product quality.
SYNTAPE B564 is a polyester non-woven adhesive tape with
synthetic rubber adhesive and is applied in the form of strips which make it permeable to impregnants. It can be applied according to the impregnant being used.
Application
As winding head insulation and phase separation. SYNTAPE® B564 is additionally used for masking cantilever coils and as stress relief for supply lines.
Standards
RoHS compliant according to 2011/65 EC.
UL file no. E301705
Delivery forms
Width: From 2.5 mm, in 0.1 mm increments
Standard length: 50 m
Core diameter: 76 mm (3“)
Special widths: Available on request
Glue
Rubber
Adhesive
one-sided
Storage
Adhesive tapes should be stored in a cool, dry place at approx. 20°C and 50 - 60% relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
| Property |
|---|