SynTape® – Electrical Adhesive Tapes SynTape® H.564
SynTape® H.564 is a SynTherm® YT511-based, flexible aramid adhesive tape with synthetic rubber adhesive and is permeable to impregnating agents thanks to a strip-shaped adhesive application (depending on the material used).
Due to the strip-shaped adhesive application, SynTape® H.564 is very easy to process and offers high dielectric strength and a solidified winding after the impregnation process, which leads to improved heat dissipation and quality improvement of the end product.
Application
SynTape® H.564 is used as winding head fixation, insulation and for phase separation. SynTape® H.564 is also used for masking self-supporting coils and as strain relief for supply lines. Due to the carrier material used, SynTape® H.564 is preferably used in products that have to guarantee high thermal stability - SynTherm® YT511 corresponds to thermal class H and has a UL94 V-0 classification.
Standards
RoHS-compliant acc. 2011/65/EU.
Delivery forms
- in tapes: from 2.5 mm width
- in rolls: up to 300 mm width
- standard length 50 m, other lengths on request
- core diameter 3“ / 76 mm
Glue
Rubber adhesive
Adhesive
one-sided
Storage
Adhesive tapes should always be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage time should generally not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
| Property | Unit of measure | |
|---|---|---|
| Type/ Ordering information | H.564 | |
| Standard colours | Nature | |
| Backing | SynTherm® YT511 | |
| Adhesive | Synthetic rubber adhesive, covered in stripes on liner | |
| Backing thickness | mm | 0.130 |
| Adhesive tape width | mm | 1,6 - 2,0 |
| Adhesive tape distance | mm | 2.0 - 2.4 |
| Tensile strength | N/cm | 25 |
| Total thickness | mm | 0.190 without liner |
| Adhesiveness / AFERA | N/cm | > 2– Note: Higher adhesive strength, but fleece splits when pulled off |
| Thermal class | depends on the impregnant applied | |
| Elongation at break | % | 2 |