SynTape® – Electrical Adhesive Tapes SynTape® H/ K.30
SynTape® H/ K.30 is a polyethylene naphthalate (Teonex®) adhesive tape with good adhesiveness due to the silicone adhesive.
The tape is characterised by its enhanced property level in contrast to common PET adhesive tapes.
Application
As core and interlayer insulation, final insulation, and taping and insulation of coils and wires.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 66 and 100 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Silicone
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Electrolyt. corrosion value | 1 | |
| Thermal class | 180 ° C/ H | |
| Dielectic strength | kV | 6 |
| Adhesiveness / Adhesion to steel | N/cm | 3.0 |
| Elongation at break | % | 50 |
| Tensile strength | N/cm | 40 |
| Total thickness | mm | 0.060 |
| Adhesive | Silicone | |
| Backing thickness | mm | 0.025 |
| Backing | TEONEX® | |
| Standard colours | blue, transparent | |
| Type/ Ordering information | H/ K.30 |