SynTape® – Electrical Adhesive Tapes SynTape® F/ PS.25
SynTape® F/ PS.25 is a glass fibre reinforced polyester adhesive tape with acrylate adhesive.
The polyester adhesive tape SynTape® F/ PS.25 has very high resistance to tears and a good resistance to impregnants.
Application
As final insulation, for masking the winding start and end, for masking supply lines and as stress relief (mechanical reinforcement).
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
acrylate
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
| Property | Unit of measure | |
|---|---|---|
| Electrolyt. corrosion value | 1 | |
| Thermal class | 155 °C/ F | |
| Adhesiveness / Adhesion to steel | N/cm | 6.5 |
| Dielectic strength | kV | 5 |
| Elongation at break | % | 5 |
| Tensile strength | N/cm | 380 |
| Total thickness | mm | 0.155 |
| Backing | Polyester glass filament reinforced | |
| Adhesive | Acrylate | |
| Backing thickness | mm | 0.085 |
| Standard colours | Translucent | |
| Type/ Ordering information | F/ PS.25 |