SynTape® – Electrical Adhesive Tapes SynTape® F/ K.30AC
SynTape® F/ K.30AC is a polyethylene naphthalate (TEONEX®) adhesive tape with good adhesiveness due to thermosetting acrylate adhesive.
The tape is characterised by its enhanced property level in contrast to common PET adhesive tapes.
Application
As core and interlayer insulation, final insulation, and taping and insulation of coils and wires.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 66 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Acrylate
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Type/ Ordering information | F/ K.30AC | |
| Standard colours | transparent | |
| Backing | TEONEX® | |
| Backing thickness | mm | 0.025 |
| Adhesive | Acrylate | |
| Thermal class | 155 °C/ F | |
| Total thickness | mm | 0.060 |
| Tensile strength | N/cm | 40 |
| Elongation at break | % | 50 |
| Adhesiveness / Adhesion to steel | N/cm | 5.0 |
| Dielectic strength | kV | 6.0 |
| Electrolyt. corrosion value | 1 |