SynTape® – Electrical Adhesive Tapes SynTape® A/ CP.50
SynTape® A/ CP.50 is a slightly creped paper adhesive tape.
Special feature of the tape is its good initial adhesiveness on various surfaces due to the ductile rubber adhesive.
Application
Final insulation for the production of motors and coil insulation.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Rubber
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Electrolyt. corrosion value | 1 | |
| Thermal class | 105 °C/ A | |
| Dielectic strength | kV | 1 |
| Adhesive | Rubber | |
| Total thickness | mm | 0.150 |
| Tensile strength | N/cm | 45 |
| Elongation at break | % | 9 |
| Adhesiveness / Adhesion to steel | N/cm | 2.5 |
| Backing thickness | mm | 0.110 |
| Backing | slightly creped paper | |
| Standard colours | cream | |
| Type/ Ordering information | A/ CP.50 |