SynTape® – Electrical Adhesive Tapes SynTape® A 560/ CA.100
SynTape® A 560/ CA.100 is an acetate rayon adhesive tape with rubber adhesive.
Easy-to-form, varnish and resin resistant adhesive tape, displays excellent adhesion even to wild windings, high initial adhesiveness.
Application
Final insulation of coils, as stress relief for supply lines, and masking the winding start and end as well as cantilever coils.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
rubber
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Type/ Ordering information | A 560/ CA.100 | |
| Standard colours | white or black | |
| Backing | Acetate fabric | |
| Backing thickness | mm | 0.160 |
| Adhesive | Rubber | |
| Thermal class | 105 °C/ A | |
| Electrolyt. corrosion value | 1 | |
| Dielectic strength | kV | 1.5 |
| Adhesiveness / Adhesion to steel | N/cm | 1.8 |
| Elongation at break | % | 10 |
| Tensile strength | N/cm | 55 |
| Total thickness | mm | 0.210 |