SynTape® – Electrical Adhesive Tapes SynTape® 1695
SynTape® 1695 consists of a metalized polyester film as a backing with a thermosetting acrylate adhesive.
High resistance to chemicals, solvents and moisture.
Application
As a splice and reflector adhesive tape for the identification of fabric defects by sensors, for repairing and splicing thermal insulation tarpaulins and for horticultural planning.
Delivery forms
- Width: from 2.5 mm, in 0.1 mm increments
- Standard lengths: 66 m rolls
- Core diameter: 76 mm (3")
- Special widths on request
Glue
Acrylate
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should always be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Type/ Ordering information | 1695 | |
| Standard colours | silver | |
| Backing | Polyester film metalized | |
| Backing thickness | mm | 0.025 |
| Adhesive | Acrylate | |
| Tensile strength | N/cm | 30 |
| Total thickness | mm | 0.070 |
| Elongation at break | % | 100 |
| Adhesiveness / Adhesion to steel | N/cm | 4.5 |