SynTape® – Electrical Adhesive Tapes 3M™ no. 5
3M™ electro-insulating tape no. 5 is a polyester adhesive tape with acrylate adhesive.
3M™ electro-insulating tape no. 5 has good resistance to solvents and limited oil resistance. Additional heat curing enhances the resistance.
UL approved up to 130 °C.
Application
Especially for core and interlayer insulation as well as final insulation of small transformers, taping and insulation of coils and wires. It has good
ageing resistance and is UL approved.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 66 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
acrylate
Adhesive
one-sided
Storage
Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
| Property | Unit of measure | |
|---|---|---|
| Electrolyt. corrosion value | 1 | |
| Thermal class | 130 ° C/ B | |
| Dielectic strength | kV | 5.5 |
| Adhesiveness / Adhesion to steel | N/cm | 3.8 |
| Elongation at break | % | 100 |
| Tensile strength | N/cm | 44 |
| Adhesive | Acrylate | |
| Total thickness | mm | 0.063 |
| Backing | Polyester film | |
| Type/ Ordering information | 3M™ electro-insulating tape no. 5 | |
| Standard colours | transparent |