SynTape® – Electrical Adhesive Tapes SynTape® H/ 560
SynTape® H / 560 is a polyimide adhesive tape with silicone adhesive for the highest electrical and thermal demands.
Constant, good adhesiveness over a large temperature range, high dielectric strength and smooth removal from the roll. Flame retardant according to UL 510.
Application
Masking of printed circuit board contacts when soldering with subsequent residue-free removal.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard lengths: 33 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Silicone
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
Property | Unit of measure | |
---|---|---|
Type/ Ordering information | H/ 560 | |
Standard colours | brown | |
Backing | Polyimide | |
Backing thickness | mm | 0.025 |
Adhesive | Silicone | |
Thermal class | 180 °C/ H | |
Flame retardant | UL510 | |
Electrolyt. corrosion value | 1 | |
Dielectic strength | kV | 6.0 |
Elongation at break | % | 35 |
Tensile strength | N/cm | 40 |
Total thickness | mm | 0.060 |
Adhesiveness / Adhesion to steel | N/cm | 2.3 |